Adam Wang

Adam Wang toegevoegd een audio Other
2026-01-20 11:20:21 -

Types of Sub-Entry Shrouds You Should Know in Continuous Casting
1. Introduction In continuous casting, maintaining the cleanliness and stability of molten steel as it flows from the ladle to the tundish is a critical requirement. One of the most important components responsible for protecting the steel stream during this transfer is the Sub-Entry Shroud (SES), sometimes also referred to as a ladle-to-tundish shroud or ladle shroud....

0 Reacties 0 aandelen 196 Views 0 voorbeeld

Please log in to like, share and comment!
Adam Wang toegevoegd een audio Other
2025-11-30 11:52:45 -

How to Extend the Life of Slide Gate Plates in Steelmaking: A Complete Technical Guide
The slide gate plate is one of the most critical functional refractories used in ladles and tundishes during steelmaking. It plays a vital role in controlling molten steel flow, ensuring safety, stabilizing casting operations, and maintaining steel cleanliness. Due to exposure to 1650°C molten steel, chemical corrosion, thermal shock, mechanical abrasion, and sliding...

0 Reacties 0 aandelen 722 Views 0 voorbeeld

Please log in to like, share and comment!
Adam Wang toegevoegd een audio Other
2025-11-29 12:57:41 -

How to Use the Ladle Shroud Gasket: A Practical and Technical Guide
In modern continuous casting (CC) systems, the ladle shroud plays a crucial role in maintaining steel cleanliness by providing a protected, inert-flow channel between the ladle and tundish. To ensure this connection is leak-tight, stable, and resistant to thermal and mechanical shocks, a ladle shroud gasket is installed between the ladle nozzle (ladle slide gate) and the...

0 Reacties 0 aandelen 742 Views 0 voorbeeld

Please log in to like, share and comment!
Adam Wang toegevoegd een audio Other
2025-11-29 12:56:19 -

What Is the Isostatic Tundish Nozzle?
1. Introduction In modern continuous casting operations, the tundish nozzle plays a crucial role in regulating molten steel flow from the tundish into the Submerged Entry Nozzle (SEN) or directly into the mold. Its reliability and flow-control stability directly impact mold level fluctuation, inclusion removal, casting speed, steel cleanliness, and overall process efficiency. Among various...

0 Reacties 0 aandelen 725 Views 0 voorbeeld

Please log in to like, share and comment!
Adam Wang updated the profile picture
2025-11-29 12:54:34 -

0 Reacties 0 aandelen 373 Views 0 voorbeeld

Please log in to like, share and comment!

Meer blogs